The Dead Rab V2 RTA by Hellvape is an excellent choice for the amateurs of buildable atomizers. The V2 has a push/slide out top fill cap; definitely an upgrade with the right amount of resistance, it doesn’t open too easy for it to be a problem but it’s also not too tight for it to be a pain.
On the bottom there is this strange looking cog thing, this is a PC insulation plate to prevent heat transfer to your mod-nicely done!
Going inside, the top side adjustable airflow is upgraded to diagonal honeycomb airflow to focus on flavor and to minimize leaking
The Dead Rabbit V2 RTA has similar ‘Rabbit Ear’ style posts to its predecessor but like the Dead Rabbit V2 RDA these posts are angled in a “Y” shape, making it easier to trim the coil legs. The holes are also bigger, allowing the use of thicker coils to fit the clamp.
Integrated deck with anti rotation, this is basically a system then ensures the coils are always positioned in the right place in accordance to the airflow direction. The Dead Rabbit V2 RTA has a 510 connection with a gold plated pin, the threads are nice and everything is well.
The interesting thing is the thermal insulation plate, underneath the tank there is a ‘well’ that’s about 1.5mm deep, inside that well is a 1.75mm thick PC (Polycarbonate) thermal insulator, in the shape of a cog.
That insulator is there for 2 reasons, first of all it is an insulator, so it stops (or lessens) the heat transfer from the RTA to the mod. Secondly, if you didn’t notice, the PC is about 0.25mm deeper than the actual well that it sits in, to protect your mod from the hard metal scratching your mod.
The deck is very reminiscent of the original Dead Rabbit RTA, but it is certainly not the same! The posts make more of a Y shape than a T shape and the holes for the coils are bigger and square, allowing for thicker coils and I personally think it makes the whole building process a bit easier and nicer.
The Airflow & Anti Rotation System
On the deck is 2 walls, one behind each wicking hole. These ‘walls’ fit perfectly into the bottom of the internal airflow chamber, and it is there where the anti rotation system was born.
From the outside the airflow is just a decent sized hole, however thanks to the internal airflow chamber the air is pulled diagonally down and then through a 6 x 3 honeycomb grill before hitting the coil, on each side.
In regards to the draw, the airflow isn’t restriction free-if you like your airflow nice and free, it’s more than ample. Turning the airflow band all the way down doesn’t make the system air tight, but it is tight enough not to allow DTL Vaping.
Specifications:
- Size: 25×50.5mm.
- Capacity: 5ml (standard) / 2ml (TPD)
- Adjustable top side diagonal honeycomb airflow.
- Y shaped “Rab Ear” posts.
- Single or dual coil builds.
- PC thermal insulation plate to protect mod from heat.
- Slide top fill.
Inside the Box
- 1 x 25mm Dead Rabbit V2 RTA
- 1 x Dead Rabbit Sticker
- 1 x User Manual
- 1 x Bubble Glass Tube
- 1 x Accessory Bag (screw driver, allen key, spare rubbers and screws)